General
Manufacturer	UBIQUITI
Model	Ubiquiti UA-SK-Elevator
Manufacturer Part No	UA-SK-Elevator
Compatible Country	Middle East, Africa, Iran, Dubai
Country of Origin	California

Ubiquiti UA-SK-Elevator Elevator Starter Kit

Name: Ubiquiti UA-SK-Elevator Elevator Starter Kit
Brand: UBIQUITI
SKU: UA-SK-Elevator
Availability: OutOfStock
Rating: 4 (1 reviews)

Brand: UBIQUITI
Model: Ubiquiti UA-SK-Elevator
Availability: Call For Price

Part No: UA-SK-Elevator
chat with Terrabyt.com

Connects to in-elevator readers with PoE to authorize floor selection. Supports up to 18 floors with digital inputs for elevator car status and emergency.

#1: (1) Elevator Hub

#2: (1) G2 Reader

#3: (2) 2-wire PoE extenders

#4: (10) Access Cards

1 reviews / Write a review

Fulfilled by Terrabyt
Condition: New

UA-Hub-Elevator

Mechanical

Dimensions 129.3 x 244.7 x 33.6 mm (5.1 x 9.6 x 1.3")

Enclosure material Polycarbonate

Mounting material Polycarbonate

Hardware

Networking interface (4) 10/100/1000 Base-T

Management interface (1) 10/100/1000 Base-T

Power method PoE++

UL 294 Power-limited Class 2 PSU

UL 60950-1/62368-1 LPS/PS2 PSU

Max. power consumption 7W (Without PoE output)

PoE input (1) PoE++, 50V DC, 1.2A

PoE output PoE passthrough, (4) PoE, 50V DC, total 42W

ESD/EMP protection Air: +8kV, contact: +4kV

Digital input (5) Car position

(6) Car status; Up/down/stop/full/door open/door close

(1) Emergency

Outputs (18) Relays

Rating 30V DC/2A

Buttons (1) Factory-reset

Terminal blocks

Ambient operating temperature -10 to 40 C (14 to 104 F)

Ambient operating humidity 5 to 95% noncondensing

Certifications CE, FCC, IC, UL 62368-1, CSA C22.2 No. 62368-1

LEDs

PoE in Steady white: Pending adoption

Steady blue: Adopted

Alternating white/blue: Firmware updating

Input terminals Blinking white: Active signal

Output relays Blinking white: Relay triggered

UACC-Extender-2Wire-Tx/Rx

Mechanical

Dimensions 40 x 105 x 25 mm (1.6 x 4.1 x 1")

Enclosure material Polycarbonate

Mounting material Polycarbonate

Hardware

Networking interface (1) 10/100 MbE

(1) Homeplug AV

Management interface (1) 10/100 MbE

Power method PoE++

Max. power consumption 3W (Without PoE output)

PoE input (1) PoE++, 50V DC, Max. 1.2A

PoE output (1) PoE+, 48V DC, 0.72A

ESD/EMP protection Air: +8kV, contact: +4kV

LED White

Ambient operating temperature -10 to 40 C (14 to 104 F)

Ambient operating humidity 5 to 95% noncondensing

Certifications CE, FCC, IC

UA-G2

Mechanical

Dimensions 93 x 40 x 36.5 mm (3.7 x 1.6 x 1.4")

Enclosure material Polycarbonate, glass

Mounting In wall, gang box

Weatherproofing IP55

Hardware

Networking interface (1) 10/100 MbE RJ45 port

Connectivity BLE 4.1

Power method PoE

UL 294 Power-limited Class 2 PSU

UL 60950-1/62368-1 LPS/PS2 PSU

Supported voltage range 48V DC

Max. power consumption 5W

ESD/EMP protection Air: +15kV, contact: +8kV

Sensors Proximity sensor

Speaker (1) 8 ohm, 0.7W

LEDs Steady white: Pending adoption

Steady blue: Adopted

Alternating white/blue: Firmware updating

Strobing red: Emergency lockdown

Steady green: Emergency evacuation

(2) Rapid flashing blue: NFC credential authenticated

(2) Rapid flashing red: NFC credential authentication failed

Breathing blue: Ready to register NFC cards

Button (1) Factory-reset

NFC frequency 13.56 MHz

NFC read range < 30 mm

NFC standards ISO 14443A, 14443B, 15693

NFC technology NFC Tag 1,2,3,4,5

MIFARE Classic

MIFAREPlus

MIFARE Ultralight

MIFARE DESFire

Operating environment Outdoor use

Ambient operating temperature -30 to 45 C (-22 to 113 F)

Ambient operating humidity 5 to 90% noncondensing

Software information The software version of a product can be checked at https://unifi.ui.com

UL 294 level Destructive attack: Level I

Line security: Level I

Endurance: Level I

Standby power: Level I

UL 294 statement Compliance with IEEE 802.3 specifications was not verified as part of UL 294.

The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.

PoE cabling requirements Cable 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site.

The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm 2 ) for patch cords; 24 AWG (0.21 mm 2 ) for horizontal or riser cable.

CAN/ULC-60839-11-1 Grade Grade assignment: I

Certifications CE, FCC, IC, UL 294, CAN/ULC-60839-11-1

Document number,and issue date and/or revision level UA-G2/UA-G2-Black, V02

UA-Card

Mechanical

Dimensions 85.6 x 54 x 0.8 mm (3.4 x 2.1 x 0.03")

Format ISO 7810 ID-1

NFC frequency 13.56 MHz

NFC technology ISO/IEC 14443 Type A

MIFARE DESFire

UniFi Access Proprietary Security Protocol

General
Manufacturer	UBIQUITI
Model	Ubiquiti UA-SK-Elevator
Manufacturer Part No	UA-SK-Elevator
Compatible Country	Middle East, Africa, Iran, Dubai
Country of Origin	California