General
Manufacturer	Cisco
Model	Cisco IE-2000-4TS-L
Manufacturer Part No	IE-2000-4TS-L

Cisco IE-2000-4TS-L Industrial Ethernet 2000 Series Switches

Name: Cisco IE-2000-4TS-L Industrial Ethernet 2000 Series Switches
Brand: Cisco
SKU: IE-2000-4TS-L
Availability: InStock
Rating: 4 (1 reviews)

Brand: Cisco
Model: Cisco IE-2000-4TS-L
Availability: Call For Price

Part No: IE-2000-4TS-L
chat with Terrabyt.com

IE-2000-4TS-L is the IE2000 series 4 10/100 RJ45 ports, 2 FE SFP, and LAN Lite switch. The Cisco IE 2000 Series are designed for low cost, low ports, and small sizes. They offer:

#1:Four, eight, or 16 10/100Base-T Ethernet ports (Small Form-Factor Pluggable [SFP] downlinks on selected models); fixed configurations with a compact form factor

#2:Two gigabit combo ports: SFP (100 Mbps and 1 Gbps) or RJ45 uplink

#3:Dual-input DC power supply, alarm relays, DIN rail mount

#4:Industrial Power over Ethernet (PoE) solution

#5.Conformal coating available

#6:Swappable SD flash card and mini-USB connector

#7:Industrial environmental compliance and certifications

#8:Industrial partner applications: Ethernet/IP and PROFINET

1 reviews / Write a review

Fulfilled by Terrabyt
Condition: New

Cisco IE-2000-4TS-L Industrial Ethernet 2000 Series Switches

Physical Specification

Total Ports
6
RJ45 ports
4 FE
SFP ports
2 FE
Manufacturing license
LAN Lite
Hardware
256 MB DRAM with ECC memory
IEEE 1588v2 FPGA
64 MB on-board flash memory
1GB removable SD flash memory card (optional)
Mini-USB connector
Alarm
Alarm I/O: Two alarm inputs to detect dry contact open or close; one alarm output relay
Power consumption
4-port downlink models: 9.5-15 W
Connectors and cabling
10/100/1000BASE-T ports: RJ-45 connectors, 4-pair Category 5 UTP cabling
Dimensions (H x W x D) including DIN rail
IE-2000 6 ports (copper downlinks) chassis: 5.1”H x 2.95”W x 4.51”D in (130mm H x 74.9mm W x 115mm D)
Weight
IE-2000 6 ports chassis: 2.45 lb (1.11 kg)
IE2000 Software Features

LAN Lite license

Baseline features
Layer 2 switching
IEEE 802.1, 802.3, 802.3at, 802.3af standard (see Table 8), VTPv2, NTP, UDLD, CDP, LLDP, Unicast MAC filter, Resilient Ethernet Protocol (REP), Media Redundancy Protocol (MRP) Ring (IEC 62439-2)
Security
SCP, SSH, SNMPv3, TACACS+, RADIUS Server/Client, MAC Address Notification, BPDU Guard, SPAN session
Multicast
IGMPv1, v2, v3 Snooping, IGMP filtering, IGMP Querier
Management
Fast Boot, Express Setup, Web Device Manager, CNA, Cisco Prime, LMS, MIB, SmartPort, SNMP, syslog
Industrial Ethernet
EtherNet/IP, Profinet v2

LAN Base license

Additional features
Layer 2 switching
VTPv3, EtherChannel, Voice VLAN, Flexlink
Security
IPv4 Port-Security, DHCP Snooping, Dynamic ARP Inspection, IP Source Guard, 802.1x, Guest VLAN. MAC Authentication Bypass, 802.1x Multi-Domain Authentication, Storm Control, Trust Boundary, Access-List (ACL)
Quality of service
IPv4 Ingress Policing, Rate-Limit, Egress Queuing/Shaping, AutoQoS, PROFINET QoS
Management
Port-Based DHCP, Storm Control – Unicast, Multicast, Broadcast, SPAN Sessions, RSPAN, DHCP Server, Customized TCAM/SDM Size Configuration, Embedded Event Manager (EEM)
Industrial Ethernet
IEEE 1588 PTPv2
IPv4 routing
IPv4 static routing
IPv6 routing
IPv6 host support, HTTP over IPv6, SNMP over IPv6

Enhanced LAN Base

Additional features
Industrial management
Layer 2 switching with 1:1 static Network Address Translation (NAT)

IP Lite license

Additional features
IPv4 routing
RIP, OSPF, EIGRP, VRF Lite, PIM for L3 multicast routing including sparse (SM) and dense (DM) mode.
IPv6 Routing
IPv6 Static routing, OSPFv3
Security
FIPS 140-2
Embedded Event Manager
EEM feature enabled with IP Lite license
DNA Essentials
Additional features
Cisco DNA Center
Discovery, topology, inventory, software image management
Visibility
DNA assurance, Device 360
Day-zero network bring-up automation
Cisco Network Plug-and-Play application